Industrial PipelinesLaajuus (3 cr)
Code: TK00BZ18
Credits
3 op
Teaching language
- Finnish
Responsible person
- Kimmo Kemppainen
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Qualifications
Introduction to Maintenance
Materials
We will announce it during the course.
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Further information
2 RDI points
Enrollment
02.12.2024 - 31.01.2025
Timing
01.01.2025 - 30.05.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT23SKKT23S
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Materials
We will announce it during the course.
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
02.08.2023 - 30.09.2024
Timing
01.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Materials
Kussilla saatava materiaali.
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
01.08.2024 - 30.09.2024
Timing
26.08.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT22SKKT22S
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Materials
Kussilla saatava materiaali.
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
01.12.2023 - 31.01.2024
Timing
01.01.2024 - 10.03.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKM21SKKM21S
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
01.08.2023 - 22.12.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT21SKKT21S
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
01.12.2021 - 31.01.2022
Timing
01.09.2022 - 24.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT20SKKT20S
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points
Enrollment
01.08.2022 - 20.12.2022
Timing
01.08.2022 - 20.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Riikka Korhonen
Groups
-
KKT20SRaaKKT20SRaa
Objective
Students will know the basics of pipeline planning and be able to select and survey the components required in the pipeline and understand the official procedures concerning pipelines.
Content
Pipeline plans and drawings
The basics of flow technology
Pumps and pipeline equipment
Preparation and installation of pipelines
Inspections and official regulations
Evaluation scale
0 - 5
Arviointikriteerit, kiitettävä (5)
The students are able to plan a pipeline system with necessary its necessary supports and to select suitable components and pumps for the system.
Assessment criteria, good (3)
The students are able to draw isometric diagrams of pipes and do technical flow calculations to determine the size of pipes and pipelines.
Arviointikriteerit, tyydyttävä (1)
The students are able to interpret drawings of pipelines and are familiar with the most common components of a pipeline as well as the principles of operation of pumps. They are aware of the official regulations and procedures concerning the use of pressure vessels.
Qualifications
Introduction to Maintenance
Further information
2 RDI points