Mechnical Planning Project WorkLaajuus (5 cr)
Code: TK00BZ21
Credits
5 op
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
02.08.2026 - 31.08.2026
Timing
01.09.2026 - 31.12.2026
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKM23SKKM23S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
02.12.2025 - 31.12.2025
Timing
01.01.2026 - 29.05.2026
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Kimmo Kemppainen
Groups
-
KKT23SKKT23S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2025 - 31.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKT22SKKT22S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2025 - 18.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKT21SKKT21S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2024 - 24.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKM21SKKM21S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKT20SKKT20S
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
Groups
-
KKT20SRaaKKT20SRaa
Objective
Students will carry out practical mechanical planning tasks and learn to apply acquired theoretical knowledge.
Content
Practical research, development and planning assignments
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations. They are able to transform an idea in a development project into a commercial product sample independently. The students are able to develop systematic methods and instructions for the planning group so it can produce optimal solutions cost-effectively.
Assessment criteria, good (3)
The students use a wide range of professional concepts fluently. As members of the project group the students complete all given assignments well, and help and guide other members of the group.
Assessment criteria, satisfactory (1)
The students gain practical knowledge of practical mechanical design tasks while learning to apply theoretical knowledge in them. As members of the project group the students complete all given assignments to a satisfactory degree. They use professional concepts systematically and can work on individual tasks according to the commission.
Prerequisites
Product Development
Further information
The course will be accomplished as R&D studies.
3 RDI points