Practical TrainingLaajuus (30 cr)
Code: TKHH001
Credits
30 op
Responsible person
- Arja Sirviö
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Assessment criteria, approved/failed
To be announced
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.08.2026 - 31.12.2026
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Miia Rönkkö
- Petteri Laitinen
- Hannu Tornberg
- Riikka Korhonen
- Sami Räsänen
- Kimmo Kemppainen
Groups
-
KKT23SKKT23S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2026 - 31.07.2026
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Miia Rönkkö
- Petri Koponen
- Petteri Laitinen
- Veera Kilpeläinen
- Hannu Tornberg
- Sami Räsänen
- Riikka Korhonen
- Kimmo Kemppainen
- Arja Sirviö
Groups
-
KKM23SKKM23S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
25.08.2025 - 21.12.2025
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Miia Rönkkö
- Petri Koponen
- Petteri Laitinen
- Hannu Tornberg
- Sami Räsänen
- Riikka Korhonen
- Kimmo Kemppainen
- Arja Sirviö
Groups
-
KKT22SKKT22S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
25.08.2025 - 21.12.2025
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Miia Rönkkö
- Hannu Tornberg
- Arja Sirviö
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
31.08.2024 - 31.12.2024
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Petteri Laitinen
- Hannu Tornberg
- Sami Räsänen
- Riikka Korhonen
- Kimmo Kemppainen
- Arja Sirviö
Groups
-
KKT21SKKT21S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
01.08.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Petteri Laitinen
- Hannu Tornberg
- Riikka Korhonen
- Sami Räsänen
- Kimmo Kemppainen
- Arja Sirviö
- Ville Karppinen
Groups
-
KKT20SKKT20S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
23.02.2023 - 30.09.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Hannu Tornberg
- Sami Räsänen
- Riikka Korhonen
- Kimmo Kemppainen
- Arja Sirviö
Groups
-
KKT20SRaaKKT20SRaa
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2023 - 31.12.2023
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Petteri Laitinen
- Hannu Tornberg
- Riikka Korhonen
- Sami Räsänen
- Kimmo Kemppainen
- Arja Sirviö
Groups
-
KKM21SKKM21S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
02.07.2022 - 16.12.2022
Timing
01.08.2022 - 16.12.2022
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petri Koponen
- Kari Mikkola
- Riikka Korhonen
- Arja Sirviö
Groups
-
KKM19KKKM19K
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points
Enrollment
01.07.2022 - 16.12.2022
Timing
31.07.2022 - 16.12.2022
Number of ECTS credits allocated
30 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Arja Sirviö
Groups
-
KKT19SKKT19S
Objective
The aim of the practical training period is to provide students with good post graduation employment opportunities and to familiarise students with working life. Students will gain knowledge of different job tasks, working procedures, devices and professional terminology related to their chosen specialism in a real working environment under supervision. The practical training period takes place during the autumn semester of the fourth study year. The practical training co-ordinator is responsible for informing students of practical training issues together with the head of the degree programme.
Content
A continuous approx five month training period in working life
Evaluation scale
0 - 5
Assessment criteria, approved/failed
To be announced
Prerequisites
Students must have 135 cr before starting their practical training period.
Further information
15 RDI credits/points