Steel and Wooden StructuresLaajuus (6 cr)
Code: TR00BH69
Credits
6 op
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Enrollment
26.07.2025 - 24.08.2025
Timing
25.08.2025 - 14.12.2025
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY24SKRY24S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
19.08.2024 - 22.09.2024
Timing
26.08.2024 - 15.12.2024
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY23SKRY23S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
01.12.2023 - 31.01.2024
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRM22SKRM22S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
01.08.2023 - 30.09.2023
Timing
01.08.2023 - 22.12.2023
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY22SKRY22S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
02.07.2022 - 30.09.2022
Timing
01.08.2022 - 16.12.2022
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY21SKRY21S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
01.08.2022 - 30.09.2022
Timing
01.08.2022 - 16.12.2022
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
School of Engineering
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY21SRaaKRY21SRaa
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials
Enrollment
01.12.2021 - 31.01.2022
Timing
01.01.2022 - 25.05.2022
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRM20SKRM20S
Objective
Students will know the properties, design, dimensioning and production technology and techniques of common steel and wood structures.
Content
Common steel and wood products and their uses
Official regulations
Dimensioning of beam and pillar structures
Joins in steel and wood structures
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel and wooden structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension a steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar. The students are able to dimension the timber framework of a floor for vibration. They are able to design and dimension simple joins.
Assessment criteria, satisfactory (1)
The students are familiar with the properties and use of wood and steel materials in building and can describe the design principles of load-bearing structures. They are able to determine the loads that the structures will bear. They can dimension a single-span steel and wood beam in ultimate and service limit state and a bent and pressed steel and wood pillar.
Prerequisites
Statics and Strength of Materials