Statics 1Laajuus (3 cr)
Code: TR00BH67
Credits
3 op
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Enrollment
30.12.2024 - 26.01.2025
Timing
10.03.2025 - 11.05.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRM24SKRM24S
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Location and time
Teams työjärjestyksen mukaisesti
Materials
Repusta löytyvä opetusmateriaali
Teaching methods
Teams opetus
Exam schedules
Esitetty repussa
Completion alternatives
Tentti ja hyväksytysti suoritettu harjoitustyö.
Student workload
Läsnäolopakkoa ei ole. Luennot nauhoitetaan
Content scheduling
Esitetty opetusmateriaaleissa
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Assessment methods and criteria
Harjoitustyön arviointikriteerit esitetty repussa 'portfolio' välilehdessä
Tentin arviointikriteerit ja malliratkaisut julkaistaan tentin jälkeen
Assessment criteria, excellent (5)
Opiskelija osaa käyttää asiantuntevasti staattisesti määrättyjen rakenteiden rasitusten analysointiin liittyviä laskentamenetelmiä, osaa soveltaa oppimaansa päättelyä vaativien ongelmien ratkaisuun ja on hankkinut laskentatekniikkaan liittyvien työkalujen käyttöön liittyvän perusrutiinin.
Toteutuksen arviointikriteerit, hyvä (3-4)
Opiskelija osaa toimia tarkoituksenmukaisesti ratkaistessaan staattisesti määrättyjen rakenteiden rasituksiin liittyviä ongelmia. Laskelmien esitystapa on selkeä ja johdonmukainen.
Assessment criteria, satisfactory (1)
Opiskelija osaa käyttää asianmukaisesti statiikan laskentamenetelmiä yksinkertaisten staattisesti määrättyjen rakenteiden rasitusten analysointiin.
Prerequisites
Physics 1 Mathematics, Geometry
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2025 - 16.03.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY24SKRY24S
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Location and time
Taito1 työjärjestyksen mukaisesti
Materials
Repusta löytyvä opetusmateriaali
Teaching methods
Lähiopetus
Exam schedules
Esitetty repussa
Completion alternatives
Tentti ja hyväksytysti suoritettu harjoitustyö.
Student workload
Läsnäolopakkoa ei ole.
Content scheduling
Esitetty opetusmateriaaleissa
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Assessment methods and criteria
Harjoitustyön arviointikriteerit esitetty repussa 'portfolio' välilehdessä
Tentin arviointikriteerit ja malliratkaisut julkaistaan tentin jälkeen
Assessment criteria, excellent (5)
Opiskelija osaa käyttää asiantuntevasti staattisesti määrättyjen rakenteiden rasitusten analysointiin liittyviä laskentamenetelmiä, osaa soveltaa oppimaansa päättelyä vaativien ongelmien ratkaisuun ja on hankkinut laskentatekniikkaan liittyvien työkalujen käyttöön liittyvän perusrutiinin.
Toteutuksen arviointikriteerit, hyvä (3-4)
Opiskelija osaa toimia tarkoituksenmukaisesti ratkaistessaan staattisesti määrättyjen rakenteiden rasituksiin liittyviä ongelmia. Laskelmien esitystapa on selkeä ja johdonmukainen.
Assessment criteria, satisfactory (1)
Opiskelija osaa käyttää asianmukaisesti statiikan laskentamenetelmiä yksinkertaisten staattisesti määrättyjen rakenteiden rasitusten analysointiin.
Prerequisites
Physics 1 Mathematics, Geometry
Enrollment
01.12.2023 - 31.01.2024
Timing
01.01.2024 - 17.03.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY23SKRY23S
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Prerequisites
Physics 1 Mathematics, Geometry
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 19.03.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Jari Kurtelius
Groups
-
KRM22SKRM22S
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Prerequisites
Physics 1 Mathematics, Geometry
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 19.03.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Jari Kurtelius
Groups
-
KRY22SKRY22S
Objective
Students will understand the static functioning of single structural parts and they will be able to estimate the effects of loads on vertical and horizontal structures that are supported in different ways.
Content
Mass point planar statics
Stiff piece planar statics
Stress and stress patterns.
Calculating lattice beam strain in an ideal lattice using the balance method
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the stress experienced by statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to solve stress problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use statics calculation methods for simple stress analyses concerning statically defined structures.
Prerequisites
Physics 1 Mathematics, Geometry