Condition based monitoringLaajuus (3 cr)
Code: TK00BS69
Credits
3 op
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Enrollment
26.07.2025 - 24.08.2025
Timing
25.08.2025 - 12.10.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT23SKKT23S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
26.07.2025 - 24.08.2025
Timing
25.08.2025 - 12.10.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKM23SKKM23S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
30.12.2024 - 26.01.2025
Timing
26.08.2024 - 10.11.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
30.12.2024 - 26.01.2025
Timing
26.08.2024 - 27.10.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT22SKKT22S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
30.12.2024 - 26.01.2025
Timing
28.08.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKM21SKKM21S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
30.12.2024 - 26.01.2025
Timing
01.08.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT21SKKT21S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
02.07.2022 - 20.12.2022
Timing
01.08.2022 - 20.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT20SKKT20S
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics
Enrollment
02.07.2022 - 20.12.2022
Timing
01.08.2022 - 20.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Riikka Korhonen
Groups
-
KKT20SRaaKKT20SRaa
Objective
The student learns about breakdowns, fault diagnostics and the choice of different methods of condition monitoring.
Content
Technical methods of condition monitoring, failure, fault diagnostics, planning of condition monitoring.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use professional concepts with expertise and can apply their professional competence as required in different situations.
The student is able to develop industrial maintenance operations in different operating environments.
A commendable level requires that you get more than 90% of the maximum points in the exam.
Assessment criteria, good (3)
The students are able to use professional concepts fluently and are able to carry out different tasks in various operational environments.
They understands the importance of industrial operation in industrial operations.
A good level requires that you get about 70 - 80% of the maximum points in the exam.
Assessment criteria, satisfactory (1)
The students are able to use professional concepts systematically and are able to work on various tasks according to instructions. They becomes aware of the importance of industrial operation in industrial operations.
A satisfactory level requires that approximately 50 - 60% of the maximum points in the exam are obtained.
Prerequisites
Industrial Maintenance
Maintenance planning and controlling
Vibrational mechanics