Mechanical ComponentsLaajuus (3 cr)
Code: TKAK004
Credits
3 op
Teaching language
- Finnish
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Materials
We will announce it during the course.
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
09.03.2026 - 10.05.2026
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT24SKKT24S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Materials
We will announce it during the course.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
31.12.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKM23SKKM23S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Materials
We will announce it during the course.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
10.03.2025 - 30.05.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT23SKKT23S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Materials
We will announce it during the course.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
29.01.2024 - 19.05.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT22SKKT22S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKM21SKKM21S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Seppo Leskinen
Groups
-
KKT21SKKT21S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
01.12.2021 - 31.01.2022
Timing
21.03.2022 - 25.05.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Seppo Leskinen
Groups
-
KKT20SRaaKKT20SRaa
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points
Enrollment
01.12.2021 - 31.01.2022
Timing
01.01.2022 - 25.05.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Seppo Leskinen
Groups
-
KKT20SKKT20S
Objective
Students will be conversant with the usual components used in machine construction and be able to select the appropriate components according to the manufacturer's instructions and/or with the aid of ADP programmes.
Content
Couplings
Bearings
Gears, breaks
Power transfer
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to utilise mechanical component selection with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine.
Assessment criteria, good (3)
The students are able to select and measure structural mechanical components as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to use mechanical component calculation methods based on strength theory in basic situations.
Prerequisites
Strength of Materials
Further information
2 RDI points