Strength of MaterialsLaajuus (3 cr)
Code: TKAK003
Credits
3 op
Responsible person
- Jari Kurtelius
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
27.10.2025 - 28.02.2026
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT24SKKT24S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
20.10.2025 - 28.02.2026
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT24SRaaKKT24SRaa
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
01.01.2025 - 15.03.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKM23SKKM23S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
21.10.2024 - 02.03.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT23SKKT23S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
23.10.2023 - 04.02.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT22SKKT22S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
09.10.2023 - 04.02.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Petteri Laitinen
Groups
-
KKT22SRaaheKKT22SRaahe
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
01.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Jari Kurtelius
Groups
-
KKM21SKKM21S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point
Enrollment
30.12.2024 - 26.01.2025
Timing
31.07.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Mechanical Engineering
Teachers
- Jari Kurtelius
Groups
-
KKT21SKKT21S
Objective
Students will understand the link between structural loads and stress levels in a structure and be able to calculate strain in a completed structure in different basic cases and assess the importance of the result.
Content
Introduction
Deformation
Types of strain
Different strain cases
Stability
Fatigue endurance limit
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods for analysing the tension of statically defined structures with expertise and can apply their acquired knowledge to solve complex problems. They can use calculation tools with routine and understand the main factors affecting dynamic certainty.
Assessment criteria, good (3)
The students are able to solve tension problems associated with statically defined structures as required. They are able to present their calculations clearly and systematically.
Assessment criteria, satisfactory (1)
The students are able to strength calculation methods for simple tension and deformation analyses concerning statically defined structures.
Prerequisites
Mechanics and Mechanisms
Structural Materials
Further information
1 RDI point