Concrete Structures, Laboratory WorkLaajuus (5 cr)
Code: TRAE009
Credits
5 op
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Further information
TKI-pisteet 1
Enrollment
19.08.2024 - 22.09.2024
Timing
26.08.2024 - 15.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRM22SKRM22S
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1
Enrollment
01.12.2023 - 31.01.2024
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRY22SKRY22S
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1
Enrollment
01.08.2022 - 31.01.2023
Timing
01.01.2023 - 05.03.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Tarmo Lähdesmäki
Groups
-
KRM20SKRM20S
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Jari Kurtelius
Groups
-
KRY21SKRY21S
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1
Enrollment
02.12.2022 - 31.01.2023
Timing
01.01.2023 - 30.04.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Jari Kurtelius
Groups
-
KRY21SRaaKRY21SRaa
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1
Enrollment
01.12.2021 - 31.01.2022
Timing
01.01.2022 - 25.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Teknologia
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree in Construction and Civil Engineering
Teachers
- Jari Kurtelius
Groups
-
KRY20SKRY20S
Objective
Students will have basic knowledge of the properties of steel concrete structures while being proficient in the dimensioning of common concrete structures.
Content
Introduction to steel concrete structure design and dimensioning.
Dimensioning concrete beam and slab structures.
Dimensioning concrete pillar and wall structures
Dimensioning of foundation structures.
Evaluation scale
0 - 5
Assessment criteria, excellent (5)
The students are able to use calculation methods in the structural planning of steel concrete structures with expertise. They are able to define the main points of the problems to be solved and apply acquired knowledge to solve similar problems.
Assessment criteria, good (3)
The students know the design principles for planning load-bearing structures and can determine the loads and load combinations of a building and its structures. They are able to explain the impact of the building's stiffening principle on the dimensioned model. They can plan and dimension the tensile and shear reinforcement of a multi ported beam and slab structure in ultimate limit state and the reinforcement of a bent and pressed pillar and the reinforcements for walls and basic structures. The students are familiar with the principles of service limit state dimensioning. They are able to choose the concrete element structures for a hall building.
Assessment criteria, satisfactory (1)
The students are able to describe the design principles of load-bearing structures and to determine the loads that the structures will bear. They can dimension the tensile and shear reinforcement of a single-span beam in ultimate limit state and a bent and pressed pillar.
Prerequisites
Statics and Strength of Materials
Further information
TKI-pisteet 1